The Albion Men's ABR1 Thermal Pocket Bib Shorts are insulated endurance cycling shorts designed for long rides as temperatures begin to drop. Built around the proven ABR1 platform, they combine cold-weather comfort with Albion’s signature cargo-carrying system for long days on the road or off it.

Thermoroubaix® fabric uses a brushed thermal inner to provide insulation while maintaining stretch, breathability, and effective moisture management. Two leg pockets and a dual side-entry rear pocket provide easy access to ride essentials, while an Elastic Interface pad delivers long-distance support in the saddle. Pair them with leg warmers to extend their versatility further into colder conditions.

Key features

• Thermoroubaix® thermal performance fabric
• Brushed inner surface for cold-weather insulation
• High-stretch construction for unrestricted movement
• Moisture-managing and breathable performance
• Signature three-pocket cargo system
• Pocket on each leg for accessible storage
• Dual side-entry rear pocket for additional carrying capacity
• Elastic Interface pad designed for long-distance comfort
• Designed for winter training and longer cold-weather rides

Performance & construction
Thermoroubaix® combines a soft brushed inner surface with high stretch and moisture management, providing warmth without compromising mobility or breathability.

Albion’s three-pocket system adds practical carrying capacity without relying entirely on jersey storage, making the bib shorts particularly suited to longer rides and changing conditions.

Size & fit
Designed with an on-bike performance fit. Fits true to size.

Care & washing instructions
Machine wash at 30°C. Do not bleach or tumble dry. Air dry to help preserve the thermal fabric, elasticity, and chamois performance.

Product-id: M1BS3-1_2

Jersey / jacket hybrid created to be the ultimate outer layer when you need to stay outside for longer in colder conditions.

Long sleeve jersey made with a brushed-back, stretch grid fleece fabric for lofted warmth and thermoregulation, and windproof panelling on the shoulders and front for high wind protection. 

A jersey that adapts to your level of exertion: the grid fleece fabric allows heat and moisture to move through and away from the body during high-tempo efforts, but creates a lofted effect to trap warm air at lower intensity. Pertex® Quantum panels on the front, shoulders and arms block the oncoming wind.

Intended Use
One layer. All Winter.
The Thermal Wind Jersey was conceived as the ultimate cold-weather layer to facilitate riding outside during the winter months, when adding or removing layers should be kept to a minimum and staying warm but comfortable is the priority. Depending on the base layer you use underneath, this product has a wide temperature range from the below freezing up into the high single digits celsius.

Features

• Close-to-the-body, engineered fit for comfort and warmth when riding in cold weather
• Brushed-back, grid fleece fabric that insulates and is breathable
• Engineered Pertex® Quantum windproof front panelling with C0 DWR for high wind protection and light shower resistance
• Six pockets: three rear pockets, zipped rear side pocket, and a front extra long stash / glove pocket with internal valuables pocket
• High collar for added warmth on colder days
• High-strength reflective trim at the rear and cuffs for added visibility on the road

Specifications:
Weight: 298g (size medium)

Product Care

• Technical garments that feature Durable Water Repellencies (DWRs), or 3-layer fabrics with breathable membranes, require specific wash care to maintain their performance
• We recommend washing these products with a garment wash designed for waterproof clothing, like Nikwax or Grangers, to maintain their performance
• Follow the washing and drying instructions provided with the garment wash you choose
  

Materials and Responsibility

• Main fabric: 40% GREENONE Biodegradable polyester 54% Recycled polyester 6% Elastane. Windproof panels: Pertex® Quantum 100% recycled nylon
• Factory: China

Sizing
Fits true to size.

Studio Model:
Height: 180cm, chest: 91cm
Wears size: Small

Product-id: M1LJ2-1_2

Highly breathable active fleece hoodie that adapts to your exertion level when worn as an outer layer, or adds insulation to any layering system when worn under.

Intended Use
Insulation that evolves with you. Use as a part of your layering system both on and off the bike as a highly breathable, fast wicking insulating outer layer or under a jacket or gilet to add lightweight insulation.

Features

• PrimaLoft Active Evolve fabric (95g/m²)
• Fast, efficient moisture transport away from the body
• Highly breathable, air permeable fabric construction
• High stretch for close to the body comfort
• Super soft hand feel
• Three quarter length YKK reverse coil zip with cord puller for ease of putting on
• and taking off, even when wearing a helmet
• Engineered hood for use with or without a helmet
• Zippable chest pocket that also functions as a packaway pocket 
• Reinforced elbow patches for enhanced durability
  

Specifications:
Weight: 150g (size medium)

Product Care
Wash at 30 degrees, do not tumble dry or bleach.

The nature of the material used in this garment means that initially there may be noticeable shedding of fibres. With repeated washing, shedding tends to decrease. There may be some thinning of the fabric over time due to wear and washing. Avoid contact with rough surfaces that could snag or abrade the fabric.

Materials and Responsibility
PrimaLoft® Active Evolve 100% recycled polyester
Factory: China

Sizing
Unisex fit
Men's fit, true to size

Studio Model:
Height: 180cm, chest: 91cm
Wears size: Small

Product-id: U2LT2-1_0

Ultralight insulated jacket that combines warmth, breathability and extreme packability to deliver the performance you need, whenever you need it.

A firm favourite for long distance riders due to its warmth to weight ratio, this jacket has been worn by winners of ultra distance events including The Atlas Mountain Race (2022 & 2024)

Intended use:
Designed to be light enough to take on any ride. Perfect for chilly early morning starts and mountain descents, or worn all day in the colder months of the year.

Features:

• Engineered fit for on-bike use - insulated and lightweight panels combined to optimise warmth and breathability
• Jacket weight - 96 grams (size M)
• Ultralightweight micro ripstop fabric with C0 Durable Water Repellency (DWR) coating for high wind resistance, insulating warmth, and some light shower resistance
• Laser cut underarm panels for increased breathability
• Lightweight hem shock cord adjuster
• Lightweight elastic rear gripper
• Lightweight elasticated cuff
• Clo™ Eco Vivo recycled breathable insulation
• YKK Vislon 2-way zip with cord pullers
• Reflective Albion linear logo at the rear

Product care:

• Technical garments that feature Durable Water Repellencies (DWRs), or 3-layer fabrics with breathable membranes, require specific wash care to maintain their performance
• We recommend washing these products with a garment wash designed for waterproof clothing, like Nikwax or Grangers, to maintain their performance
• Follow the washing and drying instructions provided with the garment wash you choose
• Do not iron
• Please contact us if you need further specific guidance on how to care for this product

Materials and responsibility:

• Main fabric: 100% recycled nylon, insulation: 90% recycled polyester, 10% Bico LMF
• Bluesign® approved fabrics
• Fabrics comply with the Global Recycled Standard (GRS)
• Factory: Albania

Sizing:
The fit and cut of this jacket is designed for on-bike use. Your jacket might feel tight across the shoulders when trying it on, standing up straight, with shoulders back.

Studio Model:

• Height: 175cm, chest: 90cm, inner leg: 78cm
• Wears size: Small
  

Product-id: U1IJA1-2_5

Lightweight, windproof, packable.

A wind gilet is one of the most versatile pieces of cycling gear to have in your layering system and we've packed ours with performance and features to help you stay outside for longer from dawn to dusk, all year round.

Intended use:
On or off road, on a short ride or a long distance race, our wind gilet adds warmth, wind protection and carrying capacity to any layering system.

Features:

• Windproof Pertex®️ Quantum micro ripstop face fabric
• C0 Durable Water Repellency (DWR) coating for light shower resistance
• Lightweight stretch mesh side panels for breathability and fit
• Garment weight - 107g (size M)
• Zippable chest pocket with internal security pocket
• YKK Vislon 2-way zip with cord pullers
• Two rear zippable mesh pockets with cord pullers for secure on bike carrying
• Right side rear pocket doubles as pack pocket
• Reflective details at rear for enhanced visibility

Product care:

• Technical garments that feature Durable
• Water Repellencies (DWRs), or 3-layer fabrics with breathable membranes, require specific wash care to maintain their performance
• We recommend washing these products with a garment wash designed for waterproof clothing, like Nikwax or Grangers, to maintain their performance
• Follow the washing and drying instructions provided with the garment wash you choose
• Do not iron
• Please contact us if you need further specific guidance on how to care for this product

Materials and responsibility:

• Fabric: 100% recycled nylon. Mesh: 90% nylon, 10% elastane
• Factory: China

Sizing:

• On-bike fit
• Size up for a more relaxed fit if wearing with looser-fitting layers

Studio model:

• Height: 175cm, chest: 90cm, inner leg: 78cm
• Wears size: Small
  

Product-id: C14R-1_2