For cyclists seeking maximum power transfer but also a minimal amount of float, Shimano’s SPD-SL Blue cleats are the answer. By placing the pivot point at the front, lateral sliding movement is eliminated. But these cleats still permit a small amount of angle change from the pivot point back towards the heel so that your foot is not completely locked in place.

• - Type: 5 LED

  - Een aluminium behuizing, deze is sterk en compact

   

  - USB oplaadbaar

  - Gewicht: 100 g

  - Maximale lichtopbrengst: 400 lumen

  - Oplaadtijd: 2,5 uur

   

   

• -Op werkdagen vóór 14.00 uur besteld, zelfde dag verstuurd

  -Gratis retourneren

  -Gratis verzending vanaf €50,-

Product-id: 1-FP-SPFLDR-V504

The Twin Chuck head thread of the Lezyne Control Drive CO2 pump fits directly onto French and carvalves. The CO2 pump is only compatible with threaded CO2 cartridges and comes with an anti-freeze jacket to protect the hands during inflation.

• CNC-machined aluminum body & button
• Control button allows easy control of air flow
• Speed Twin head for Presta and Schrader valves
• Copper quill and anti-freeze sealing
• Including 16g cartridge and neoprene sleeve
• Close accurately after drilling pattern

Product-id: 1-C2-CTRLDR-V104

Create more space for bottles alongside a frame pack and convert two-bolt bottle cage mounts into three-bolt cargo cage mounts.

The Innovation Lab Bottle Cage Adapter makes it possible to lower or raise bottle cages by 55mm and converts standard two-bolt mounts into three-bolt mounts, allowing for larger cages and greater carrying capacity.

The bottle cage relocator simply bolts onto bottle cage mounts, creating 55mm of vertical movement to make it easier to fit bottles alongside a frame pack. Using the supplied bolts, the bottle cage is then attached directly to the bottle cage adapter. With three mounting points available, it is possible to convert standard two-bolt mounts into three-bolt mounts, capable of carrying cargo cages and increasing carrying capacity.

Made from lightweight 6061-T6 aluminium alloy, the Innovation Lab Bottle Cage Adapter is low profile and unobtrusive. Some frames will require a single bottle cage relocator, while others (typically smaller frames) will require a pair to minimise overlap with any frame bags. The adapter is most effective at creating space when combined with side entry bottle cages and is compatible with all two and three bolt cages

The bottle cage adjuster is Precision Crafted from lightweight 6061-T6 aluminium alloy and anodized for a scratch-resistant finish. Only the supplied bolts should be used, to ensure adequate clearance between the bottle cage adapter and the frame.

Materials: 6061-T6 aluminium alloy, anodized black; 3 x 7mm M5 hex-headed stainless-steel bolts

Product-id: ZIR-0000-000

The lightweight option for when you need a few more tools for your roadside repair. Don't get stuck on the side of the road or trail because you didn't have the right tool for your repair.

The mid-length tool design is long enough to provide access to recessed fasteners, but short enough not to experience twist or damage under moderate torque as can happen on longer tools. All tools are forged rather than bent from hex stock. While this method of construction is more expensive, the value is unquestioned during a road-side repair. Mid-length tools also allow us to position the tools within the same plane, reducing the thickness of the overall package by half. Double chromed tools and fully stainless steel hardware and bushings guarantee a long life without corrosion (the number 1 killer of multi-tools is corrosion). Forged aluminum sidebars contain rare-earth magnets for holding a spare chain connector.

• Aluminum sides with integrated masterlink storage
• Hex: 2, 2.5, 3, 4, 5, 6, and 8mm
• T10, T20, T25, PH2, PH Flat, and disc pad spreader
• 8mm cap connects to 5mm for optimal use of space
• 98g

Product-id: AM-TL-MIT-ASY-002

A complete set of precision hex wrenches and bit drivers that elevates the look and feel of any home mechanic's tool kit.

One of the first things you notice in the toolboxes of top level motorsport or Pro-Tour mechanics are extremely high quality hex keys. The reasoning is simple; better tool fit leads to better feel and confidence for the mechanic as well as a significant reduction in the likelihood of damaging exotic fasteners made from Titanium or Aluminum. For the HX-ONE, we use the finest S2 tool steel; a shock resistant steel which has been refined by toolmakers for the optimal balance of strength, hardness, shock resistance and dimensional control. The keys are then coated with thin-dense chrome and a high-grip, high-visibility textured polymer finish for maximum grip and control. Included with the HX-ONE ESSENTIAL KIT is the proprietary SILCA 17-4 Stainless Magnetic Adapter. The adapter turns the 6mm hex key into a ¼” bit driver.

• CNC machined Beechwood box with magnetic closure
• S2 steel hex keys: 2, 2.5, 3, 4, 5, 6, 8 and 10mm
• Red polymer coating for superior grip
• Custom 6mm to 1/4" bit adapter
• S2 steel Torx® bits: T8, T10, T15, T20, T25 and T30
• S2 steel Screw bits: PH1, PH2, SL4 and SL5

Product-id: AM-TL-HEX-ASY-001