Lightweight, packable rain protection made with a highly breathable Pertex® Shield 3-layer fabric and featuring our new Triple Zip, an innovative rainwear zip system designed for ease of use in foul weather.

The Triple Zip puts two zips next to each other to provide the functionality of a double zip with the ease of use of a single zip when used in wet or challenging conditions. The two zips side-by-side allow a single slider with an oversized puller to be used on the main zip for ease of use and engagement in wet and windy weather. A second zip inserted next to the main zip allows the jacket to be opened from the bottom for venting and access to rear pockets. This parallel zip also serves as a zipper to a secure chest pocket.

Intended use:
Waterproof, windproof and packable for riding in bad weather. 

Features:

• Engineered fit for on-bike use
• Pertex® Shield 3-layer fabric featuring a PFC-free membrane and a C0 Durable Water Repellency (DWR)
• Fabric performance - water column 20,000mm, moisture vapour transmission rate 20,000g/m2/day
• Fully taped seams
• Triple Zip - two zips side by side allow a single slider with an oversized puller to be used on the main zip for ease of use and engagement in foul weather, with a second zip inserted next to the main zip allowing the jacket to be opened from the bottom for venting and access to rear pockets, as well as housing the zip puller for a chest pocket.
• Oversized main zip puller and grabbable tab at the base of the zip for quick orientation and ease of use in foul weather
• Quick seal and release cuffs, designed for ease of use getting the jacket on and off, that can also double as vents for additional temperature regulation
• ‘Forever Chemical free’ - this product uses no fluorocarbons in either the membrane or the DWR
• Zippable front chest pocket with puller
• Highly packable - fits easily into a rear jersey pocket or the rear pocket on our ABR1 pocket shorts
• Weight 184 grams (size M)
• Bonded internal rear gripper
• Reflective Albion linear logo at rear
• Internal neck hang loop

Product care:

• Technical garments that feature Durable Water Repellencies (DWRs), or 3-layer fabrics with breathable membranes, require specific wash care to maintain their performance
• We recommend washing these products with a garment wash designed for waterproof clothing, like Nikwax or Grangers, to maintain their performance
• Follow the washing and drying instructions provided with the garment wash you choose

Materials and responsibility:

• Fabric: 100% Recycled Nylon
• Fabrics comply with the Global Recycled Standard (GRS)
• Fluorocarbon free (C0) Durable Water Repellency (DWR) and Membrane
• Factory: China

Sizing:
The fit and cut of this jacket is designed for on-bike use. Your jacket might feel tight across the shoulders when trying it on stood up straight, with shoulders back.
Studio Model:

Product-id: S23C42-1_3

Lightweight, packable rain protection made with a highly breathable Pertex® Shield 3-layer fabric and featuring our new Triple Zip, an innovative rainwear zip system designed for ease of use in foul weather.

The Triple Zip puts two zips next to each other to provide the functionality of a double zip with the ease of use of a single zip when used in wet or challenging conditions. The two zips side-by-side allow a single slider with an oversized puller to be used on the main zip for ease of use and engagement in wet and windy weather. A second zip inserted next to the main zip allows the jacket to be opened from the bottom for venting and access to rear pockets. This parallel zip also serves as a zipper to a secure chest pocket.

Intended use:
Waterproof, windproof and packable for riding in bad weather. 

Features:

• Engineered fit for on-bike use
• Pertex® Shield 3-layer fabric featuring a PFC-free membrane and a C0 Durable Water Repellency (DWR)
• Fabric performance - water column 20,000mm, moisture vapour transmission rate 20,000g/m2/day
• Fully taped seams
• Triple Zip - two zips side by side allow a single slider with an oversized puller to be used on the main zip for ease of use and engagement in foul weather, with a second zip inserted next to the main zip allowing the jacket to be opened from the bottom for venting and access to rear pockets, as well as housing the zip puller for a chest pocket.
• Oversized main zip puller and grabbable tab at the base of the zip for quick orientation and ease of use in foul weather
• Quick seal and release cuffs, designed for ease of use getting the jacket on and off, that can also double as vents for additional temperature regulation
• ‘Forever Chemical free’ - this product uses no fluorocarbons in either the membrane or the DWR
• Zippable front chest pocket with puller
• Highly packable - fits easily into a rear jersey pocket or the rear pocket on our ABR1 pocket shorts
• Weight 184 grams (size M)
• Bonded internal rear gripper
• Reflective Albion linear logo at rear
• Internal neck hang loop

Product care:

• Technical garments that feature Durable Water Repellencies (DWRs), or 3-layer fabrics with breathable membranes, require specific wash care to maintain their performance
• We recommend washing these products with a garment wash designed for waterproof clothing, like Nikwax or Grangers, to maintain their performance
• Follow the washing and drying instructions provided with the garment wash you choose

Materials and responsibility:

• Fabric: 100% Recycled Nylon
• Fabrics comply with the Global Recycled Standard (GRS)
• Fluorocarbon free (C0) Durable Water Repellency (DWR) and Membrane
• Factory: China

Sizing:
The fit and cut of this jacket is designed for on-bike use. Your jacket might feel tight across the shoulders when trying it on stood up straight, with shoulders back.
Studio Model:

• Height: 180cm, chest: 91cm, inner leg: 80cm
• Wears size: Small

Product-id: C42-3_2

Highly breathable active fleece hoodie that adapts to your exertion level when worn as an outer layer, or adds insulation to any layering system when worn under.

Intended Use
Insulation that evolves with you. Use as a part of your layering system both on and off the bike as a highly breathable, fast wicking insulating outer layer or under a jacket or gilet to add lightweight insulation.

Features

• PrimaLoft Active Evolve fabric (95g/m²)
• Fast, efficient moisture transport away from the body
• Highly breathable, air permeable fabric construction
• High stretch for close to the body comfort
• Super soft hand feel
• Three quarter length YKK reverse coil zip with cord puller for ease of putting on
• and taking off, even when wearing a helmet
• Engineered hood for use with or without a helmet
• Zippable chest pocket that also functions as a packaway pocket 
• Reinforced elbow patches for enhanced durability
  

Specifications:
Weight: 150g (size medium)

Product Care
Wash at 30 degrees, do not tumble dry or bleach.

The nature of the material used in this garment means that initially there may be noticeable shedding of fibres. With repeated washing, shedding tends to decrease. There may be some thinning of the fabric over time due to wear and washing. Avoid contact with rough surfaces that could snag or abrade the fabric.

Materials and Responsibility
PrimaLoft® Active Evolve 100% recycled polyester
Factory: China

Sizing
Unisex fit
Men's fit, true to size

Studio Model:
Height: 180cm, chest: 91cm
Wears size: Small

Product-id: U2LT2-1_2

Ultralight insulated jacket that combines warmth, breathability and extreme packability to deliver the performance you need, whenever you need it.

A firm favourite for long distance riders due to its warmth to weight ratio, this jacket has been worn by winners of ultra distance events including The Atlas Mountain Race (2022 & 2024)

Intended use:
Designed to be light enough to take on any ride. Perfect for chilly early morning starts and mountain descents, or worn all day in the colder months of the year.

Features:

• Engineered fit for on-bike use - insulated and lightweight panels combined to optimise warmth and breathability
• Jacket weight - 96 grams (size M)
• Ultralightweight micro ripstop fabric with C0 Durable Water Repellency (DWR) coating for high wind resistance, insulating warmth, and some light shower resistance
• Laser cut underarm panels for increased breathability
• Lightweight hem shock cord adjuster
• Lightweight elastic rear gripper
• Lightweight elasticated cuff
• Clo™ Eco Vivo recycled breathable insulation
• YKK Vislon 2-way zip with cord pullers
• Reflective Albion linear logo at the rear

Product care:

• Technical garments that feature Durable Water Repellencies (DWRs), or 3-layer fabrics with breathable membranes, require specific wash care to maintain their performance
• We recommend washing these products with a garment wash designed for waterproof clothing, like Nikwax or Grangers, to maintain their performance
• Follow the washing and drying instructions provided with the garment wash you choose
• Do not iron
• Please contact us if you need further specific guidance on how to care for this product

Materials and responsibility:

• Main fabric: 100% recycled nylon, insulation: 90% recycled polyester, 10% Bico LMF
• Bluesign® approved fabrics
• Fabrics comply with the Global Recycled Standard (GRS)
• Factory: Albania

Sizing:
The fit and cut of this jacket is designed for on-bike use. Your jacket might feel tight across the shoulders when trying it on, standing up straight, with shoulders back.

Studio Model:

• Height: 175cm, chest: 90cm, inner leg: 78cm
• Wears size: Small
  

Product-id: U1IJA1-3_2

Ultralight insulated jacket that combines warmth, breathability and extreme packability to deliver the performance you need, whenever you need it.

A firm favourite for long distance riders due to its warmth to weight ratio, this jacket has been worn by winners of ultra distance events including The Atlas Mountain Race (2022 & 2024)

Intended use:
Designed to be light enough to take on any ride. Perfect for chilly early morning starts and mountain descents, or worn all day in the colder months of the year.

Features:

• Engineered fit for on-bike use - insulated and lightweight panels combined to optimise warmth and breathability
• Jacket weight - 96 grams (size M)
• Ultralightweight micro ripstop fabric with C0 Durable Water Repellency (DWR) coating for high wind resistance, insulating warmth, and some light shower resistance
• Laser cut underarm panels for increased breathability
• Lightweight hem shock cord adjuster
• Lightweight elastic rear gripper
• Lightweight elasticated cuff
• Clo™ Eco Vivo recycled breathable insulation
• YKK Vislon 2-way zip with cord pullers
• Reflective Albion linear logo at the rear

Product care:

• Technical garments that feature Durable Water Repellencies (DWRs), or 3-layer fabrics with breathable membranes, require specific wash care to maintain their performance
• We recommend washing these products with a garment wash designed for waterproof clothing, like Nikwax or Grangers, to maintain their performance
• Follow the washing and drying instructions provided with the garment wash you choose
• Do not iron
• Please contact us if you need further specific guidance on how to care for this product

Materials and responsibility:

• Main fabric: 100% recycled nylon, insulation: 90% recycled polyester, 10% Bico LMF
• Bluesign® approved fabrics
• Fabrics comply with the Global Recycled Standard (GRS)
• Factory: Albania

Sizing:
The fit and cut of this jacket is designed for on-bike use. Your jacket might feel tight across the shoulders when trying it on, standing up straight, with shoulders back.

Studio Model:

• Height: 175cm, chest: 90cm, inner leg: 78cm
• Wears size: Small
  

Product-id: U1IJA1-2_2

High-performance waterproof shell engineered for demanding on- and off-bike use.

Technical rain jacket designed around Pertex® Shield Air, a next-generation waterproof and highly breathable fabric created to perform during intense outdoor activity.

Crafted from 100% recycled Pertex® Shield Air with an air-permeable nanofibre membrane, the Zoa Rain Shell offers outstanding moisture management and durable protection in wet conditions. Packed with smart details for cyclists and anyone spending long hours outdoors.

Exceptional rain protection paired with impressive breathability, even during high-tempo efforts.

Intended Use
Built for movement. Designed for bad weather.
A versatile outer layer for year-round riding or outdoor adventures where staying dry and regulating heat is essential. The jacket’s breathable membrane and adjustable features make it suitable for anything from steady rides to high-intensity efforts in changeable conditions.

Features

• Pertex® Shield Air 3-layer construction with C0 DWR for strong waterproof protection and high breathability
• Fully adjustable drawcord hood, wearable with or without a helmet
• Two-way Aquaguard front zip for controlled ventilation
• Dual side pockets with mesh lining and two-way zips to create additional venting options
• Ergonomically designed cuffs for improved comfort and airflow when riding
• Adjustable hem with drawcord
• Reflective details on arms and back for increased visibility
• Requires proper technical wash care to maintain waterproof performance
• Recommended to wash with specialised waterproof-garment cleaners such as Nikwax or Grangers

Specifications

• Fabric: 100% recycled nylon
• Certification: Bluesign® approved materials
• Fit: Suitable for both on- and off-bike use

Product-id: U2JA1-1_3