Long rides, endless comfort. Developed with the feedback from winners of some of the world’s most challenging endurance cycling races, the ABR1 Pocket Bib Shorts feature our unique three pocket configuration and have been designed for maximum comfort to help riders to stay outside for longer.

The ABR1 Pocket Bib Shorts have established themselves as the go-to shorts for long distance riding, with victories and Fastest Known Times on iconic events including the American Triple Crown (Tour Divide, Colorado Trail, Arizona Trail), The Atlas Mountain Race and the Highland Trail 550.

Chosen by riders from the front to the back of the field due to their unique three pocket system and reputation for exceptional comfort over long distances.

Updated for 2025 with a new main body fabric utilising a higher gauge knit to deliver more compression whilst maintaining the fit and comfort loved by Albion’s community of athletes and adventurers.

The shorts also feature new straps knitted with polypropylene for faster and more effective moisture transfer away from the body, as well as the Rear Guard, an invisible panel above the pad at the rear of the shorts to enhance the durability and longevity of the product.

The ABR1 Pocket Bib Shorts feature Albion’s unique three pocket system, with two pockets on the legs and a rear side entry pocket for secure, accessible storage, and a lightweight chamois for long distance riding from market leaders in pad technology Elastic Interface.

Intended use:
Designed for maximum comfort and performance on long days out, whether you're riding on or off road.

Features:

• New for 2025: main body fabric utilising a higher gauge knit to deliver more compression
• New for 2025: straps knitted with polypropylene for faster and more effective moisture transfer away from the body
• Three pockets: mesh pockets on each leg and a rear mesh pocket allow for load carrying and easy access whilst riding
• Albion x Elastic Interface ultra pad technology for long distance riding (with recycled face fabric)
• Rear Guard: an invisible panel above the pad at the rear of the shorts to enhance product durability and longevity
• Reduced panel, anatomical design using 4-way stretch performance recycled fabrics
• Mesh upper back panel to aid breathability
• Wide exterior silicone leg gripper
• Flatlock seams for close to the body comfort
• Reflective tabs at side / rear
• Fabric UPF rating of 50+

Product care:
Wash at 30 degrees, do not tumble dry or bleach.

Materials and responsibility:

• Fabric: Main 78% recycled nylon, 22% polyester; mesh 73% recycled nylon, 27% recycled elastane
• OEKO-TEX® STANDARD 100 certified fabrics
• bluesign® approved fabrics
• Factory: Albania

Sizing:
On bike fit. Fits true to size

Studio model
Height: 180cm, chest: 91cm, inner leg: 80cm
Wears size: Small

Product-id: M1BS2-3_2

Lightweight, breathable short sleeve jersey designed for riding in hot weather. Designed for comfort and performance when riding in hot weather.

• Lightweight, breathable mesh front, side and underarm panels for enhanced cooling and moisture management when riding.
• Lightweight, mechanical knit fabric on sleeves and back for UV protection.
• Flatlock seam construction for reduced bulk and close to the body ‘race’ fit.
• Angled rear side seams to create a more aerodynamic shape even with full pockets.
• Lightweight reverse coil YKK camlock zip

Wash at 30 degrees, do not tumble dry or bleach.

Materials and responsibility:
Fabric: mesh 87% recycled polyester, 13% elastane, sleeves/back 100% recycled polyester

Sizing:
This product has a close to the body, 'race' fit.

Height: 183cm, chest: 101cm, inner leg: 91cm
Wears size: Medium

Product-id: A9R-5_2

Lightweight, packable rain protection made with a highly breathable Pertex® Shield 3-layer fabric and featuring our new Triple Zip, an innovative rainwear zip system designed for ease of use in foul weather.

The Triple Zip puts two zips next to each other to provide the functionality of a double zip with the ease of use of a single zip when used in wet or challenging conditions. The two zips side-by-side allow a single slider with an oversized puller to be used on the main zip for ease of use and engagement in wet and windy weather. A second zip inserted next to the main zip allows the jacket to be opened from the bottom for venting and access to rear pockets. This parallel zip also serves as a zipper to a secure chest pocket.

Intended use:
Waterproof, windproof and packable for riding in bad weather. 

Features:

• Engineered fit for on-bike use
• Pertex® Shield 3-layer fabric featuring a PFC-free membrane and a C0 Durable Water Repellency (DWR)
• Fabric performance - water column 20,000mm, moisture vapour transmission rate 20,000g/m2/day
• Fully taped seams
• Triple Zip - two zips side by side allow a single slider with an oversized puller to be used on the main zip for ease of use and engagement in foul weather, with a second zip inserted next to the main zip allowing the jacket to be opened from the bottom for venting and access to rear pockets, as well as housing the zip puller for a chest pocket.
• Oversized main zip puller and grabbable tab at the base of the zip for quick orientation and ease of use in foul weather
• Quick seal and release cuffs, designed for ease of use getting the jacket on and off, that can also double as vents for additional temperature regulation
• ‘Forever Chemical free’ - this product uses no fluorocarbons in either the membrane or the DWR
• Zippable front chest pocket with puller
• Highly packable - fits easily into a rear jersey pocket or the rear pocket on our ABR1 pocket shorts
• Weight 184 grams (size M)
• Bonded internal rear gripper
• Reflective Albion linear logo at rear
• Internal neck hang loop

Product care:

• Technical garments that feature Durable Water Repellencies (DWRs), or 3-layer fabrics with breathable membranes, require specific wash care to maintain their performance
• We recommend washing these products with a garment wash designed for waterproof clothing, like Nikwax or Grangers, to maintain their performance
• Follow the washing and drying instructions provided with the garment wash you choose

Materials and responsibility:

• Fabric: 100% Recycled Nylon
• Fabrics comply with the Global Recycled Standard (GRS)
• Fluorocarbon free (C0) Durable Water Repellency (DWR) and Membrane
• Factory: China

Sizing:
The fit and cut of this jacket is designed for on-bike use. Your jacket might feel tight across the shoulders when trying it on stood up straight, with shoulders back.
Studio Model:

• Height: 180cm, chest: 91cm, inner leg: 80cm
• Wears size: Small

Product-id: C42-3_2

High performance bib tights with load carrying capacity, including a rear pocket to carry an extra layer and side pockets for your essentials. Designed for maximum comfort to help you stay outside for longer during the colder months.

Intended Use
Using the same pad as the Albion ABR1 Pocket Bib Shorts, these versatile tights were designed for comfort on long days out when the temperature drops.

Features

• Three pockets: mesh pockets on each leg and a rear mesh pocket allow for load carrying and easy access whilst riding
• Panelled construction to combine warmth, wind block, leg articulation and temperature regulation
• C0 DWR treatment to provide protection against road spray and/or showers
• Albion x Elastic Interface ultra pad technology for long distance riding (with recycled face fabric)
• Mesh upper back panel to aid breathability
• High-reflectivity strips in the calf and rear thigh area for enhanced visibility in all light conditions
• Flatlock seams for close to the body comfort

Product Care

• Wash at 30 degrees, do not tumble dry or bleach

Materials and Responsibility

• Fabric: Main 83% recycled nylon, 17% elastane; Knee panel 85% nylon, 15% elastane; Lower Leg 80% recycled nylon, 20% elastane; Mesh 73% recycled nylon, 27% recycled elastane
• Bluesign® approved fabrics
• Factory: Albania

Sizing
Fits true to size.

Studio Model:
Height: 186cm, chest: 93cm, inner leg: 87cm
Wears size: Small

-5

-4

-3

-2

-1

0

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

Product-id: B8R-1_3

Product-id: M1SJ12-1_1

Product-id: M1SJ12-3_1