Lightweight, breathable short sleeve jersey designed for riding in hot weather. Designed for comfort and performance when riding in hot weather.

• Lightweight, breathable mesh front, side and underarm panels for enhanced cooling and moisture management when riding.
• Lightweight, mechanical knit fabric on sleeves and back for UV protection.
• Flatlock seam construction for reduced bulk and close to the body ‘race’ fit.
• Angled rear side seams to create a more aerodynamic shape even with full pockets.
• Lightweight reverse coil YKK camlock zip

Wash at 30 degrees, do not tumble dry or bleach.

Materials and responsibility:
Fabric: mesh 87% recycled polyester, 13% elastane, sleeves/back 100% recycled polyester

Sizing:
This product has a close to the body, 'race' fit.

Height: 183cm, chest: 101cm, inner leg: 91cm
Wears size: Medium

Product-id: A9R-5_2

Lightweight, packable rain protection made with a highly breathable Pertex® Shield 3-layer fabric and featuring our new Triple Zip, an innovative rainwear zip system designed for ease of use in foul weather.

The Triple Zip puts two zips next to each other to provide the functionality of a double zip with the ease of use of a single zip when used in wet or challenging conditions. The two zips side-by-side allow a single slider with an oversized puller to be used on the main zip for ease of use and engagement in wet and windy weather. A second zip inserted next to the main zip allows the jacket to be opened from the bottom for venting and access to rear pockets. This parallel zip also serves as a zipper to a secure chest pocket.

Intended use:
Waterproof, windproof and packable for riding in bad weather. 

Features:

• Engineered fit for on-bike use
• Pertex® Shield 3-layer fabric featuring a PFC-free membrane and a C0 Durable Water Repellency (DWR)
• Fabric performance - water column 20,000mm, moisture vapour transmission rate 20,000g/m2/day
• Fully taped seams
• Triple Zip - two zips side by side allow a single slider with an oversized puller to be used on the main zip for ease of use and engagement in foul weather, with a second zip inserted next to the main zip allowing the jacket to be opened from the bottom for venting and access to rear pockets, as well as housing the zip puller for a chest pocket.
• Oversized main zip puller and grabbable tab at the base of the zip for quick orientation and ease of use in foul weather
• Quick seal and release cuffs, designed for ease of use getting the jacket on and off, that can also double as vents for additional temperature regulation
• ‘Forever Chemical free’ - this product uses no fluorocarbons in either the membrane or the DWR
• Zippable front chest pocket with puller
• Highly packable - fits easily into a rear jersey pocket or the rear pocket on our ABR1 pocket shorts
• Weight 184 grams (size M)
• Bonded internal rear gripper
• Reflective Albion linear logo at rear
• Internal neck hang loop

Product care:

• Technical garments that feature Durable Water Repellencies (DWRs), or 3-layer fabrics with breathable membranes, require specific wash care to maintain their performance
• We recommend washing these products with a garment wash designed for waterproof clothing, like Nikwax or Grangers, to maintain their performance
• Follow the washing and drying instructions provided with the garment wash you choose

Materials and responsibility:

• Fabric: 100% Recycled Nylon
• Fabrics comply with the Global Recycled Standard (GRS)
• Fluorocarbon free (C0) Durable Water Repellency (DWR) and Membrane
• Factory: China

Sizing:
The fit and cut of this jacket is designed for on-bike use. Your jacket might feel tight across the shoulders when trying it on stood up straight, with shoulders back.
Studio Model:

• Height: 180cm, chest: 91cm, inner leg: 80cm
• Wears size: Small

Product-id: C42-3_2

High performance bib tights with load carrying capacity, including a rear pocket to carry an extra layer and side pockets for your essentials. Designed for maximum comfort to help you stay outside for longer during the colder months.

Intended Use
Using the same pad as the Albion ABR1 Pocket Bib Shorts, these versatile tights were designed for comfort on long days out when the temperature drops.

Features

• Three pockets: mesh pockets on each leg and a rear mesh pocket allow for load carrying and easy access whilst riding
• Panelled construction to combine warmth, wind block, leg articulation and temperature regulation
• C0 DWR treatment to provide protection against road spray and/or showers
• Albion x Elastic Interface ultra pad technology for long distance riding (with recycled face fabric)
• Mesh upper back panel to aid breathability
• High-reflectivity strips in the calf and rear thigh area for enhanced visibility in all light conditions
• Flatlock seams for close to the body comfort

Product Care

• Wash at 30 degrees, do not tumble dry or bleach

Materials and Responsibility

• Fabric: Main 83% recycled nylon, 17% elastane; Knee panel 85% nylon, 15% elastane; Lower Leg 80% recycled nylon, 20% elastane; Mesh 73% recycled nylon, 27% recycled elastane
• Bluesign® approved fabrics
• Factory: Albania

Sizing
Fits true to size.

Studio Model:
Height: 186cm, chest: 93cm, inner leg: 87cm
Wears size: Small

-5

-4

-3

-2

-1

0

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

Product-id: B8R-1_3

Product-id: M1SJ12-1_1

Product-id: M1SJ12-3_1

Lightweight, windproof, packable.

A wind gilet is one of the most versatile pieces of cycling gear to have in your layering system and we've packed ours with performance and features to help you stay outside for longer from dawn to dusk, all year round.

Intended use:
On or off road, on a short ride or a long distance race, our wind gilet adds warmth, wind protection and carrying capacity to any layering system.

Features:

• Windproof Pertex®️ Quantum micro ripstop face fabric
• C0 Durable Water Repellency (DWR) coating for light shower resistance
• Lightweight stretch mesh side panels for breathability and fit
• Garment weight - 107g (size M)
• Zippable chest pocket with internal security pocket
• YKK Vislon 2-way zip with cord pullers
• Two rear zippable mesh pockets with cord pullers for secure on bike carrying
• Right side rear pocket doubles as pack pocket
• Reflective details at rear for enhanced visibility

Product care:

• Technical garments that feature Durable
• Water Repellencies (DWRs), or 3-layer fabrics with breathable membranes, require specific wash care to maintain their performance
• We recommend washing these products with a garment wash designed for waterproof clothing, like Nikwax or Grangers, to maintain their performance
• Follow the washing and drying instructions provided with the garment wash you choose
• Do not iron
• Please contact us if you need further specific guidance on how to care for this product

Materials and responsibility:

• Fabric: 100% recycled nylon. Mesh: 90% nylon, 10% elastane
• Factory: China

Sizing:

• On-bike fit
• Size up for a more relaxed fit if wearing with looser-fitting layers

Studio model:

• Height: 175cm, chest: 90cm, inner leg: 78cm
• Wears size: Small
  

Product-id: C14R-1_2